 |
|
|
Typical Uni-forms Configurations
MSI's standard Uni-forms™ tolerance is +/- .002". For those special applications where an extremely high degree of control is required, tolerances of +/- .0005" can be achieved.
Although Uni-forms are available in a variety of configurations, including rectangles, ellipses, and trapezoids, the most common shapes are rings and plugs.
| FIGURE 1. |
 |
"A"
OUTSIDE
DIAMETER |
"B"
MINIMUM
WALL
THICKNESS |
"C"
PART
THICKNESS
RANGE |
| .051"-.070" |
.020" |
.016"-.055" |
| .071"-.100" |
.020" |
.020"-.065" |
| .101"-.140" |
.025" |
.030"-.070" |
| .141"-.180" |
.030" |
.035"-.080" |
| .181"-.220" |
.034" |
.035"-.085" |
| .221"-.350" |
.040" |
.035"-.090" |
| .351"-.500" |
.045" |
.040"-.110" |
| "A" > .500" CONSULT FACTORY |
| FIGURE 2. |
 |
"A"
DIAMETER |
"C"
THICKNESS
RANGE |
| .040"-.050" |
.010"-.050" |
| .051"-.070" |
.015"-.090" |
| .071"-.100" |
.020"-.100" |
| .101"-.140" |
.025"-.130" |
| .141"-.180" |
.035"-.170" |
| .181"-.350" |
.035"-.170" |
| .351"-.500" |
.040"-.170" |
| "A" > .500" CONSULT FACTORY |
Please contact Multi-Seals to discuss additional configurations or to receive samples.
|
